I am pretty sure I need to replace the stator on my 2009. Finding tutorials is like pissing into the wind. If anyone has good resources on this, particularly a BWT quality video, please share.
Stator or Rectifier/regulator? If its the stator then its buried deep, if its the regulator that's on the left side behind the left black panel with the Yamaha circle logo.
If it's the stator then as the engine didn't change drastically then its like this 2001.
I am pretty sure I need to replace the stator on my 2009. Finding tutorials is like pissing into the wind. If anyone has good resources on this, particularly a BWT quality video, please share.
I followed the manual and it was reasonably straight fwd ... this is my experience with my 2002 model (which aside from body work is the same engine). I cleaned up all surfaces before reassembly (wire wheel on my dremel (nowhere near the bike)) and the metal gasket too.
take you time, be patient, think about things as needed and it'll all go smoothly.
also, before yo udo the pull down, measure the impedences of the coils as directed in the manual AND measure that NONE of the white wires has continuity with ground (the stator windings are fully floating electrically from the chassis)
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Yamaha Majesty Scooter Forum
94.6K posts
4.6K members
Since 2005
A forum community dedicated to Yamaha Majesty scooter owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!